C136 Ramp Door Spring Replacement
Toy Hauler Ramp Door Springs C136 On Sale 2 Piece Set
Toy Hauler Ramp Door Springs We carry Springs to fit, Weekend Warrior, Extreme, KZ, Forest River, Eclipse, Thor, RagN, Skyline, Fleetwood And many other Toy Hauler Manufactures.
-
To proper measure springs you must measure from one end of coils to the other side.
-
Do not measure from the end of the tabs or from eye to eye.
-
Toy Hauler springs come in various shapes and sizes.
-
It is important that you measure your existing springs before purchasing new ones.
-
To do this, make sure to measure only the broken springs one end of the coil to the other end of the coil.
-
Do not measure any hoops or hooks that might be attached to the spring.
-
Make sure to measure the outside diameter of the spring as well. ( Most common size 2 1/2" Outside Diameter)
-
This should give you an accurate measurement that you can use to purchase your new set of springs.
-
Aside from the actual measurements you will also need to know what kind of spring you are shopping for.
The C136 36 in. Clip-End Extension Spring is a spring replacement for heavier toy haulers using lift springs. We recommend replacing all springs at the same time for balanced door lift and even wear.
- Safety containment rod to prevent spring from coming loose
- Minimum 1 in. low headroom required
- Length over coils is 36 in.
- Outside diameter is 2-1/2 in.
- Wire diameter gauge is (0.283) no: 1
- Initial tension is 213 lbs. - 237 lbs.
- Maximum allowable stretch is 24.5 in.
(Toy Hauler Springs Are Sold In Pairs)
Made To Order - 1-2 Week Lead Time No Returns On Special Order Springs
TOY HAULER SPRINGS ARE Available in various sizes so please measure correctly to insure proper safe fit and function.
Once again measure the broken spring(s) only Take a measurement of the length, without loops or clips Measure the outside diameter of the spring From the break of the spring, measure the length of 20 coils to the nearest 1/16".