Toy Hauler Fuel Pump Replacement For On The Go Fueling EZ8RV
Regular price
$329.00
Sale
Replace your Toy Hauler's fuel pump with the EZ8RV by On The Go Fueling.
This easy-to-install pump is designed specifically for Toy Haulers, allowing for efficient and convenient fueling while on the go. Never worry about running out of gas again.
Toy Hauler Fuel Pump Replacement For On The Go Fueling - (EZ8RV)
This ez8rv fuel pump will fit most Toy Haulers - Fleetwood, Weekend, Warrior, Eclipse, Forest River, Thor, Ragen, Attitude, Jayco, KZ, Genesis, Pacific Coach and much more.... REPLACE YOUR OLD SEIZED PUMP WITH A BRAND NEW EZ-8RVS, 12-volt electric gear pumps.
Notice: This pump is not intended to be used with an automatic nozzle.
An automatic bypass valve prevents pressure build up when the pump is on with the nozzle closed.
To avoid motor damage, do not run the pump more than 5 minutes with the nozzle closed. The rated duty cycle of this pump is 15 minutes ON and 30 minutes OFF.
Allow the pump to cool for 30 minutes.
FUEL TYPE
This pump is designed for use only with gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene.
Do not use this pump for dispensing any fluids other than those for which it was designed. To do so may damage pump components and will void the warranty.
This pump is designed to operate on a typical 12-volt DC automotive electrical system.
The pump is designed to operate with 12-volts DC at the motor leads and the ratings are determined at this voltage. Performance may vary due to length of power cord, battery condition or output from vehicle charging system that will affect system voltage.
Do not leave the system running without fluids. "Dry running" can damage the pump. If the system fails to deliver fuel after 15 to 20 seconds, turn the system off and refer to the Troubleshooting Section.
Do not pump the tank completely dry, as contaminants from the bottom of the tank may enter the pump.
SAFETY INSTRUCTIONS
Observe all safety precautions concerning safe handling of petroleum fuels.
To ensure safe operation, all fuel transfer systems must be properly grounded. Proper grounding means a continuous metal-to-metal contact from one component to the next, including tank, bung, pump, meter, filter, hose and nozzle.
Care should be taken to ensure proper grounding during initial installation and after any service or repair procedures. For your safety, please take a moment to review the warnings in this manual.
To prevent physical injury, observe precautions against fire or explosion when dispensing fuel.
Do not operate the system in the presence of any source of ignition including running or hot engines, lighted cigarettes, or gas or electric heaters. Observe precautions against electrical shock when operating the system.
Serious or fatal shock can result from operating electrical equipment in damp or wet locations.
Inspect external pump wiring regularly to make sure it is correctly attached to the battery. To avoid electrical shock, use extra care when connecting the pump to power.
Avoid prolonged skin contact with petroleum fuels. Use protective goggles, gloves, and aprons in case of splashing or spills. Change saturated clothing and wash skin promptly with soap and water.
Observe precautions against electrical shock when servicing the pump.
Always disconnect power before repairing or servicing.
Campbell Sales does not manufacture the EZ-8RV Fuel pumps - Great Plains Industries manufactures this pump.
If you are needing information on another pump or replacement part Campbell Sales will not have this information. Please go to Great Plains Website for information on parts and accessories.